Materials Library
Add materials once; pick them per project in any tool.
Import CSV: bulk add materials
Choose a CSV or XLSX file, or paste text.
File Columns
Import Back By ID
Units In A Cell
| Column | Required | Example | Notes |
|---|---|---|---|
Name | yes | 3/4in Walnut | Used verbatim in cut-list CSVs. |
Type | no | sheet | sheet (default), banding, or hardwood. |
Core | no | MDF | What the panel is made of under the face. Any name works, not just the common ones. |
Species | no | Walnut | The wood itself. Any name works. |
Thickness (mm) | no | 19 | Actual thickness. A plain number is read as mm because the header says mm; write the unit into the cell (3/4", 23/32, 0.75in) and that wins. A number that is not a board thickness is refused with its line number instead of imported. |
Thickness Unit | no | in_frac | How this board's thickness should read back: mm, in_frac (fractions like 23/32) or in (decimals like 0.719). Leave it out and it follows the page. |
Rough Thickness (mm) | no | 25.4 | The size the board was sawn at, which is the size your yard invoices. Board-foot pricing bills this number; every cut size comes from Thickness instead. Leave it out and the board is billed at what it measures. Lumber only, and it can never be smaller than the actual thickness. |
Nominal | no | 3/4 in | What you call it. |
Finish | no | unfinished | finished or unfinished. |
Grain | no | vertical | vertical / horizontal / none. Sheet/hardwood only. |
Cut Style | no | flat | flat / quartersawn / rift. Sheet/hardwood only; describes how the lumber was milled. |
Panel Grade | no | G1S | Which faces are show-grade: G1S (good one side) or G2S (good two sides). Sheet goods. |
Veneer Grade | no | B | How good the show face looks: AA, A, B, C, D, one of the Baltic birch pairs (Baltic Birch BB/BB and so on), or Not applicable. |
Color | no | #3a2818 | Hex. |
Roles | no | carcass;door | One or more of carcass (cabinet box / shelves), back (back panel), applied (applied side), drawerbox, drawerbottom, faceframe (front frame), door. Separate multiple with ;. |
Sheet Width (mm) | no | 1219 | Default 1219 (4 ft). A bare 48 is refused rather than read as 48 mm; write 48" if you mean inches. |
Sheet Length (mm) | no | 2438 | Default 2438 (8 ft). Same rule as the width. |
Edgebanding Width (mm) | no | 19 | Roll strip width, always written here in mm. Default 19. (edgebanding only) |
Edgebanding Width Unit | no | in_frac | The unit that roll was sold in, so a 3/4 in roll of edgebanding reads back as 3/4 in and not 19.05 mm. One of mm / cm / in / in_frac. Leave it out and the roll reads in mm. (edgebanding only) |
Edgebanding Type | no | Wood Veneer | What the strip is made of: Wood Veneer, ABS or PVC. Your own type is written Other: Melamine. Any other word is asked about, never guessed. Empty is Not Set. (edgebanding only) |
Pre-Glued | no | Yes | Yes if the roll has hot-melt glue on the back, No if it does not. Empty is Not Set. (edgebanding only) |
Core Name | no | ProCore | What the supplier calls the sheet's core. Tell the vendor this when you reorder. (sheet goods only) |
Supplier | no | Windsor Plywood | Where you buy it. |
Manufacturer | no | Columbia | Who makes it, which is often not who sells it. |
SKU | no | PW-34-BIR | Your supplier's item number. |
Back Face | no | Phenolic Backer | What the other face of a one-sided sheet is: a phenolic or melamine backer, kraft or paper, unfinished or raw, a different veneer or decor, or your own words (they come in as Other). The header can also read Back, Backer or Phenolic Back. Empty, or same as the face, means the back is the face. (sheet goods only) |
Back Thickness (mm) | no | 1 | How thick the backer is. Read like every other length here, so 0.039in works too. It is not the board's thickness, and nothing is cut from it. |
Back Description | no | generic phenolic | Your own words for the back, up to 120 characters. |
Quote Ref | no | Q-48213 | The reference on the supplier's quote this price came from. |
Quote Date | no | 2026-11-09 | The day of that quote, written year-month-day. |
Note | no | Ask about lead time | Anything to remember about this material. |
ID | no | m_k3x9p2 | The material's own ID, written by Export. Leave it alone. A row whose ID is in this library updates that material; a blank or unknown ID adds a new one. |
Product Line | no | Fenix | The maker's product family. |
Decor | no | Beige Arizona | The name the maker gives the decor or color. |
Decor Code | no | J0748 | The maker's decor or model code. Keep it as text, so 00123 stays 00123. |
Price Date | no | 11/11/2026 | The day this price was checked, written MM/DD/YYYY or year-month-day. A changed price with this cell left alone is dated today. |
Show a tiny example file
Name,Species,Thickness (mm),Nominal,Finish,Grain,Color,Roles 3/4in Walnut,Walnut,19,3/4 in,unfinished,vertical,#3a2818,carcass;door 5/8in Baltic Birch,Baltic Birch,16,5/8 in,finished,vertical,#d8b878,drawerbox 3/4in White Oak,White Oak,19,3/4 in,unfinished,vertical,#a07c50,carcass
Tip: no inch mark in a Name; write "in" or "3-4" to keep CSV parsing simple.